AXIS Track Light 1.5 m 66W black 3CCT

LED Damp-Proof Lights for Cellars, Garages and Workshops

LED damp-proof lights are built for rooms where dust, moisture or splash water occur. Their sealed housing with gasket achieves IP65 protection and withstands cleaning with a water jet. Typical locations are cellars, garages, underground car parks, workshops, warehouses and agricultural buildings.

Compared with old fluorescent battens, the LED models save considerable energy and need no tube changes. Length and luminous flux are the main selection criteria: smaller models suffice for cellars, while longer high-output versions make sense in halls. Many luminaires can be linked into continuous light bands.

LED Floodlights for Yards, Facades and Sports Grounds

LED floodlights bring light to large outdoor areas – from the yard and facade to the sports ground. Our range extends from compact 10-watt fittings for the front door to powerful 1.500-watt models for storage yards and sports facilities. All floodlights are weatherproof to IP65 or IP66 and withstand rain, snow and frost.

Some models are available with an infrared motion sensor so the light switches on only when needed, saving energy. Besides wattage, the beam angle matters when choosing: narrow angles reach far, wide angles cover large areas at short distances. We are happy to help determine the right output for your area.

LED Garden Lighting for Outdoor Areas

LED garden lighting stages paths, plants and water features after dark. This category includes inground spotlights for setting into terraces, driveways or lawns as well as underwater lights for ponds, pools and fountains. All fittings are made of stainless steel and protected to IP67 or IP68 depending on the location.

Most models run on 24 volt low-voltage technology, which makes operation outdoors and near water safe. As a planning rule: a few deliberately placed points of light usually work better than uniform continuous lighting. Matching drivers and cable connectors are available in our accessories category.

LED High Bay Lighting for Industry and Commerce

LED high bay lighting has to light large rooms with high ceilings reliably while operating economically. This category includes UFO high bay lights, linear high bay luminaires and canopy fittings for different ceiling heights and uses. Ceiling height, floor area and the type of work are decisive: in warehouses even base brightness matters most, at assembly workstations a low glare rating too.

The beam angle must match the height – narrower for high ceilings, wider for low ones. Compared with old mercury vapour or fluorescent installations, LED high bays often save more than half the energy costs. We are happy to support the design of your hall with a recommendation on quantity and layout.

LED Panels for Office, Practice and Retail

LED panels create a large, evenly lit surface instead of individual bright points. This makes them the standard solution for offices, medical practices, schools and meeting rooms where calm, low-glare light is wanted. We stock backlit panels, in which the LEDs sit behind the diffuser, and edgelit panels with side-fed light and an especially slim design.

The common sizes 60x60, 62x62, 120x30 and 120x60 centimetres are available to suit standard ceiling grids. For ceilings without a grid we offer surface mounting frames that allow direct installation. Watch the UGR value where screen work takes place – the lower, the more comfortable.

LED Track System for Retail and Commerce

An LED track system is the most flexible way to light sales areas. The luminaires are fitted onto the 3-phase busbar via an adapter and can be moved, added to or replaced at any time – with no electrical work at the ceiling. Using the three phases L1, L2 and L3 you switch several lighting groups separately, for example general light and shop window.

This category contains spotlights, linear luminaires, slim panels, food lighting and emergency fittings for the same track. Our adapters fit the common European systems such as Stucchi, Global, Staff, Unipro, Eutrac and Ivela as well as the EU universal standard. If your store layout changes, simply move the luminaires.

LED Street Lighting for Paths, Squares and Residential Areas

LED street lighting replaces old sodium and mercury vapour fittings while considerably reducing energy consumption. This category includes street lights for carriageways, post top luminaires for parks and residential areas, and lanterns in a classic style. All luminaires are protected to IP66 against dust and water jets and built for year-round outdoor use.

Many models allow power and colour temperature to be set by switch, so one fitting serves different situations. In residential areas warm light at 3000 K or below makes sense, as it disturbs residents and insects less. The adapters usually fit poles with 60 and 76 millimetre diameters.

LED Strips for Furniture, Display Cases and Light Lines

LED strips are flexible light bands that can be stuck to almost any surface. Use them to light display cases, shelves, furniture fronts, alcoves and ceiling edges – anywhere a normal luminaire would be too large. We stock two technologies: classic SMD strips with individual visible light points and COB strips that create a continuous, dot-free line of light.

For voltage you can choose between 24 volt low voltage, which needs a driver, and 230 volt strips run directly from the mains. Watch the power per metre: it determines both brightness and the size of driver required. Matching drivers, profiles and connectors are in our accessories category.

LED Accessories for Installation and Operation

A finished lighting project involves more than the luminaire itself. This category contains drivers for LED strips and fittings, motion sensors for retrofitting, brackets and pole adapters as well as cable and plug connectors. Drivers in particular deserve a careful look: the output must match the connected load and should offer around 20 percent headroom so the unit does not permanently run at its limit.

Motion sensors reduce energy costs where light is only needed occasionally – in corridors, stairwells and outdoor areas. Brackets and adapters ensure floodlights and street luminaires sit securely in the intended place. If you are unsure which accessory suits your fitting, just ask us.

AXIS LED linear track light, 1.5 m, 3000/4000/5000 K, black, 66W

Item number: AXL1566WS-2

Category: Axis series

Power:: 55 Watt66 Watt+ 10,00 €

149,00 €

including 19% VAT., no shipping costs

From	Price per unit
2	144,90 €
10	139,90 €

Not available now!

Description

⚡ AXIS LED Linear Track Light · 1.5 m · 66 W · black housing

AXIS LED Linear Track Light 1.5 m 66 W – 10560 lm · 3CCT (3000/4000/5000 K) · 160 lm/W · 90° + 30° tiltable | black housing

Architectural LED linear luminaire for 3-phase tracks – part of the modular AXIS system for retail, showrooms and offices. With switchable light colour (3000/4000/5000 K), DIP-selectable power and a high efficacy of 160 lm/W. Black aluminium housing, 90° wide and 30° tiltable, slides freely along the track.

1.5 m

LENGTH

66 W

POWER

160 lm/W

EFFICACY

3CCT

LIGHT COLOUR

3CCT and multi-power – maximum planning flexibility

The AXIS linear luminaire was developed for architects and lighting designers and ensures a consistent, high-quality appearance. A switch lets you select the light colour between 3000 K (warm white), 4000 K (neutral white) and 5000 K (daylight white); a DIP switch sets the power in fine steps. In this 66 W version it delivers 10560 lm at 160 lm/W. The long 1.5 m version delivers maximum luminous flux for large areas and continuous lines. The black aluminium housing sets elegant accents on dark ceilings.

Your benefits at a glance

3CCT switchable Light colour selectable via switch: 3000 K, 4000 K or 5000 K – one model for many applications.	Multi-power via DIP switch Power finely adjustable via DIP switch – flexible lighting design and simple stock-keeping.
High efficacy of 160 lm/W High luminous efficacy for low running costs and sustainable operation.	Slides along the track 3-phase adapter (L1/L2/L3) – the luminaire can be positioned freely on the track.
90° wide + 30° tiltable Wide, even 90° light distribution; each luminaire also tilts individually by ±15° left/right (30° range).	Aluminium housing in black Elegant black housing that sets refined accents on dark ceilings.

Optics & tilt

Each AXIS luminaire combines a wide 90° optic with an individually tiltable lens: the optical head tilts ±15° to the left or right (30° range). This lets you aim the light precisely at merchandise, walls or circulation areas – with a consistently even, wide light pattern.

Technical Data

Property	Value
Type	LED linear luminaire for 3-phase track
Power	66 W (via DIP: 51 / 56 / 61 / 66 W)
Luminous flux	10560 lm
Luminous efficacy	160 lm/W
Energy efficiency class	D (EU 2019/2015)
Light colour	3000 / 4000 / 5000 K (switchable, 3CCT)
Colour rendering (CRI)	> 80 (Ra)
Beam angle	90° (wide)
Tilt	±15° left/right (30° range)
Power factor	0.9
Dimmable	no
Protection rating	IP20
Dimensions (L × W × H)	1498 × 66 × 45 mm
Housing	Aluminium, black
Track	3-phase (European standard, 4-wire / 3-phase)
Mounting	slides along the track; suspension possible
Driver	output-selectable (multi-power)
Lifespan	L70B10 > 100,000 h
Certification	CE, RoHS

Mounting & connection

The AXIS is inserted into a 3-phase track to European standard (4-wire / 3-phase; also 3-wire / 1-phase) and slides freely along it. Use the DIP switches to select power and phase (L1/L2/L3) and the switch to set the light colour. The luminaire is then locked onto the track with the adapter knob; suspension is optionally possible. Installation and connection must be carried out only by a qualified electrician with the supply disconnected. The matching track is available separately.

Applications

Ideal for large sales areas, supermarkets, showrooms and halls that call for long, continuous and especially bright lines of light.

Scope of delivery: 1 × AXIS LED linear track light (1.5 m, 66 W, black) with integrated 3-phase adapter and output-selectable driver. Note: matching 3-phase track and suspension kit available separately.